Renault Laguna III Manual page 2287

POWER ASSISTED STEERING
Power-assisted steering pump: Removal - Refitting
K4M
Special tooling required
Ms. 583 Pipe clamps.
Mot. 1448 Remote operation pliers for
hose clips.
Tightening torquesm
high pressure pipe
union
high-pressure pipe
bracket nut8
high-pressure pipe
bracket bolt
IMPORTANT
Consult the safety and cleanliness advice and oper-
ation recommendations before carrying out any
repair (see 36A, Steering assembly, Steering:
Precautions for the repair, page 36A-4) .
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the engine undertray bolts,
- the engine undertray,
- the engine cover,
- the accessories belt (see Accessories belt: Re-
moval - Refitting) (11A, Top and front of engine).
a Move the power-assisted steering fluid reservoir to
one side.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
21 N.m
N.m
8 N.m
a Fit the tool (Ms. 583) (1) on the power-assisted
steering pump's supply pipe.
a Remove:
- the clip (2) using the (Mot. 1448),
- the low pressure pipe (3) from the power-assisted
steering pump.
a Remove:
- the bolt (4) from the power-assisted steering pipe
bracket,
36B-8
36B
128338
128337