Renault Laguna III Manual page 2347

MECHANICAL COMPONENT CONTROLS
Brake servo: Removal - Refitting
- . (Mot. 1672)
D91, and V9X, and AJ0
a Refit the catalytic pre-converter (see Front catalytic
pre-converter: Removal - Refitting) (19B, Ex-
haust).
a Refit:
- the air outlet pipe of the air filter unit,
- the air filter unit (see Air filter unit: Removal - Re-
fitting) (12A, Fuel mixture),
- the max fuse box bolt,
- the engine cover,
- the brake light switch (see 37A, Mechanical com-
ponent controls, Brake pedal switch: Removal -
Refitting, page 37A-29) .
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Check that the connecting pin between the brake
servo pushrod and the brake pedal is locked in
place.
a Bleed the brake circuit (see 30A, General informa-
tion, Braking circuit: Bleed, page 30A-4) .
PK4 or TL4
a Bleed the clutch circuit (see 37A, Mechanical com-
ponent controls, Clutch circuit: Bleed, page 37A-
47) .
a Refit the dashboard lower trim (see Dashboard
lower trim: Removal - Refitting) (57A, Interior
equipment).
37A-13
37A