Renault Laguna III Manual page 2341

MECHANICAL COMPONENT CONTROLS
Brake servo non-return valve: Removal - Refitting
F4R
REFITTING
I - REFITTING PREPARATIONS OPERATION
a Check the condition of the sealing washer and the
non-return valve.
a Replace any faulty parts.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the non-return valve.
a Connect the non-return valve on:
- the vacuum pump,
- the intake distributor,
- the union (3) ,
- the pressure sensor connector,
- the brake servo.
III - FINAL OPERATION.
a Refit:
- the engine cover,
- the front left-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 416,
55A, Exterior protection),
- the front left-hand wheel (see 35A, Wheels and ty-
res, Wheel: Removal - Refitting, page 35A-1) .
37A-7
37A