Renault Laguna III Manual page 2295

POWER ASSISTED STEERING
Power-assisted steering pump assembly: Removal - Refitting
K9K or M4R – M9R, and 742
a Remove the bolt (3) from the high pressure pipe
bracket on the pump assembly.
a Disconnect the pump assembly high pressure pipe.
a Remove:
- the bolts (4) from the pump assembly mounting,
- the pump assembly with its mounting.
Note:
Do not remove the pump assembly from its
mounting.
REFITTING
I - REFITTING PREPARATIONS OPERATION
a Always replace the high pressure pipe O-ring.
Note:
The pump assembly is supplied with its mount-
ing.
II - REFITTING OPERATION FOR PART
CONCERNED
122858
a Refit:
- the pump assembly with its mounting,
- the pump assembly mounting bolts.
a Tighten the hydraulic unit mounting bolts (21 Nm)
in the following order:
- (1), (2), (3).
a Fit an O-ring on the high pressure pipe.
36B-16
36B
122858
122859