Show Ipv6 Mroute-Boundary - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 mroute-boundary

Displays IPv6 scoped multicast boundaries which are configured on the system.
show ipv6 mroute-boundary
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> show ipv6 mroute-boundary
Interface Name
--------------------------------+-------------------------------
vlan-5
vlan-8
output definitions
Interface Name
Boundary Address
Release History
Release 6.3.4; command was introduced.
page 31-10
Boundary Address/Prefix Length
ff06::/16
ff08::/16
The name of the interface on which the boundary is assigned. Packets
with a destination address in the associated address/mask range will not
be forwarded from this interface.
The IPv6 group address which when combined with the prefix length
identifies the group range for which the scoped boundary exists.
Multicast Routing Commands
OmniSwitch CLI Reference Guide June 2012