Honda Accord 2008 Manual page 1971

07/11/02 09:43:15 61TA0000_210_0107
Climate Control
DTC Troubleshooting
DTC indicator A:
Error
NOTE: Check the battery condition (see page 22-88) and
the charging system (see page 4-26).
1. Turn the ignition switch to LOCK (0) and then to
ON (II).
2. Do the self-diagnostic function with the climate
control (see page 21-88).
3. Check for DTCs.
Is DT C A indicated?
YES − The climate control unit is faulty; replace the
climate control unit.
NO − Intermittent failure; the climate control unit is
OK at this time.
21-106 21-106
ＴＡ０８ＡＨ７Ｋ７１１０００８７０１０ＦＡＡＴ００
Climate Control Unit Internal DTC indicator J and A/C ON:
the Mode Control Linkage, Doors, or Motor
Circuit
1. Turn the ignition switch to LOCK (0) and then to
ON (II).
2. Do the self-diagnostic function with the climate
control unit (see page 21-88).
3. Check for DTCs.
Is DT C J and A/ C ON indicated?
−
YES Go to step 4.
NO − Intermittent failure, check for loose wires or
poor connections on the mode control motor
circuit.
4. Turn the ignition switch to LOCK (0).
5. Test the mode control motor (see page 21-162).
Is the mode control motor OK ?
−
YES Go to step 6.
NO − Replace the mode control motor (see page
21-55), or repair the mode control linkage or
doors.
6. Disconnect the mode control motor 7P connector.
7. Disconnect climate control unit connector A (28P).
ＴＡ０８ＡＨ７Ｋ７１１０００８７１００ＦＡＡＴ００
A Problem in