Oil Pump - Suzuki Baleno Manual

OIL PUMP

1. Oil pump drive gear
2. Driven gear
3. Body
Removal
1) Remove 2 oil pump cover seal rings.
2) Remove oil pump cover seal (O ring).
3) Remove 11 bolts.
4) Remove oil pump cover.
Inspection
1) Inspect pump body oil seal.
Check for wear, damage or cracks.
Replace oil seal if necessary and apply grease to its lip portion
slightly when it is installed.
2) Check body clearance of driven gear.
Push driven gear to one side of body. Using a feeler gauge,
measure clearance between driven gear and body.
If clearance exceeds its limit, replace gear.
Body clearance
Standard : 0.07 – 0.15 mm (0.0028 – 0.0059 in.)
Limit : 0.3 mm (0.011 in.)
AUTOMATIC TRANSMISSION (3 A/T) 7B-75
1. Oil pump body oil seal
2. Oil pump body
3. Cover seal (Apply grease)
4. Drive gear
5. Driven gear
6. Oil pump cover
7. Cover seal ring