Suzuki Baleno Manual page 304

4-10 FRONT DRIVE SHAFT
1. Left oil seal 2. Right oil seal
D When installing right side oil seal, use care so that it is in proper
direction by referring to left figure.
"A": Grease 99000-25010
1. Right side oil seal
[1.8 L Engine Model]
Install center shaft by reversing removal procedure and noting the
following points.
D When installing bearing support circlip, make sure that it fits in
circlip groove in center bearing support securely as shown.
1. Circlip
2. Center bearing
support
3. Center bearing
D When installing oil seals, use care so that they are in proper
direction referring to left figure.
"A": Grease 99000-25010
D Press-fit center shaft from left oil seal side.
1. Center shaft