Suzuki Baleno Manual page 858

7C1-2 CLUTCH (HYDRAULIC TYPE)
The clutch is a hydraulically controlled diaphragm spring clutch of a dry single disc type. The diaphragm spring is
of a tapering-finger type, which is a solid ring in the outer diameter part, with a series of tapered fingers pointing
inward.
The disc, carrying four torsional coil springs, is positioned on the transmission input shaft with an involute spline
fit.
The clutch cover is secured to the flywheel, and carries the diaphragm spring in such a way that the peripheral edge
of the spring pushes on the pressure plate against the flywheel (with the disc in between), when the clutch release
bearing is held back. This is the engaged condition of the clutch.
Depressing the clutch pedal causes the release bearing to advance and pushes on the tips of the tapered fingers
of the diaphragm spring. When this happens, the diaphragm spring pulls the pressure plate away from the flywheel,
thereby interrupting the flow of drive from flywheel through clutch disc to transmission input shaft.
GENERAL DESCRIPTION
1. Clutch cover
2. Pressure plate
3. Diaphragm spring
4. Release bearing
5. Release shaft
6. Transmission right case
7. Clutch disc
8. Torsional spring
9. Input shaft bearing
10. Input shaft
11. Crankshaft
12. Flywheel