Suzuki Baleno Manual page 723

ENGINE BRAKE TEST
WARNING:
Before test, make sure that there is no vehicle behind so
as to prevent rear-end collision.
1) While driving vehicle in 3rd gear of "D" range, shift select lever
down to "2" range and check if engine brake operates.
2) In the same way as in Step 1), check engine brake for operation
when select lever is shifted down to "L" range.
3) Engine brake should operate in above test.
Test result
Fails to operate when shifted
down to "2" range
Fails to operate when shifted
down to "L" range
"P" RANGE TEST
1) Stop vehicle on a slope, shift select lever to "P" range and at the
same time apply parking brake.
2) After stopping engine, depress brake pedal and release parking
brake.
3) Then, release brake pedal gradually and check that vehicle re-
mains stationary.
4) Depress brake pedal and shift select lever to "N" range.
5) Then, release brake pedal gradually and check that vehicle
moves.
WARNING:
Before test, check to make sure no one is around ve-
hicle or down on a slope and keep watchful for safety
during test.
Test result
Vehicle moves at "P" range or
remains stationary at "N" range
AUTOMATIC TRANSMISSION 7B1-39
Possible cause
2nd/4th brake defective
1st/Reverse brake defective
Possible cause
Defective parking lock pawl
or spring