Suzuki Baleno Manual page 911

8-14 BODY ELECTRICAL SYSTEM
LIGHT REMAINDER WARNING BUZZER
DESCRIPTION OF CIRCUIT
The light remainder warning buzzer circuit is a system designed to sound the buzzer if the driver opens the door
(driver's side) while the lights (headlight and small light) are still on, warning him to turn off the lights.
INSPECTION
If light remainder warning buzzer does not sound or interior light
shows no lighting, use the above circuit diagram as reference to
check buzzer, wiring, etc.
INSPECTION OF WARNING CONTROLLER/BUZZER
First, connect positive (+) terminal of battery to terminals "12" of
controller and negative (–) one to terminal "2" and "17".
If buzzer emits buzzing sound then, controller is in good condition.
If not, replace.
NOTE:
– – – – –: German spec. vehicle only
1. Battery 8. Combination
2. Main fuse
3. Relay/fuse box 9. Door switch
4. Tail light relay
5. Ignition switch 10. Joint
6. Junction box
7. Warning controller/
buzzer
(light) switch
(driver side)
connector