Remove And Install Strut Assembly - Suzuki Baleno Manual

REMOVE AND INSTALL STRUT ASSEMBLY

NOTE:
When disassembling strut assembly, loosen strut nut a little
before removing strut assembly from vehicle. This will make
disassembly easier. Note, however, nut must not be removed
at this point.
REMOVAL
1) Hoist vehicle, allowing front suspension to hang free.
2) Remove wheel.
3) Remove E ring securing brake hose and take brake hose off
strut bracket as shown.
4) Remove ABS wheel speed sensor harness mounting bolt.
(If equipped)
5) Remove strut bracket bolts.
6) Remove strut support nuts.
Hold strut by hand so that it will not fall off.
7) Remove strut assembly.
1. Nut
FRONT SUSPENSION 3D-5