Reverse Clutch; Preliminary Inspection - Suzuki Baleno Manual

REVERSE CLUTCH

1. Oil pump body
2. Reverse clutch drum with bearing
3. O-ring
4. Reverse clutch piston
5. Reverse clutch return spring
6. Snap ring
1. Sun gear input flange
2. Thrust washer 3. Retainer ring
1. Input shaft
2. Thrust needle roller bearing
3. Thrust bearing race
7. Clutch plate
8. Clutch No.3 disc
9. Snap ring
10. Thrust needle roller bearing
11. Input shaft
12. Thrust needle roller hearing

PRELIMINARY INSPECTION

Measure pack clearance.
1) Remove sun gear input flange with thrust washer installed by
removing retainer ring.
2) Remove input shaft with thrust bearing race and thrust needle
roller bearing installed.
AUTOMATIC TRANSMISSION 7B1-119
13. Thrust bearing race
14. Seal ring
15. Sun gear input flange
16. Thrust washer
17. Retainer ring