Suzuki Baleno Manual page 635

1. Direct clutch solenoid valve coupler
2. 2nd brake solenoid valve coupler
DISASSEMBLY
CAUTION:
D Thoroughly clean transmission exterior before over-
hauling it.
D Keep working table, tools and hands clean while over-
hauling.
D Use special care to handle aluminum parts so as not
to damage them.
D Do not expose removed parts to dust. Keep them clean
always.
1) Remove torque converter.
2) Remove engine mounting LH bracket.
3) Remove oil level gauge and oil filler tube.
4) Drain transmission fluid.
To drain fluid better, tilt transmission in various directions.
5) Remove oil pan and oil pan gasket.
NOTE:
D For removal of oil pan, do not turn transmission over as
this will contaminate valve body with foreign matters in
the bottom of oil pan.
D When removing oil pan, tap around it lightly with a plastic
hammer. Do not force it off by using a screwdriver or the
like.
6) Disconnect couplers of direct clutch and 2nd brake solenoid
valves.
AUTOMATIC TRANSMISSION (3 A/T) 7B-65