Inspect Brake Shoe & Lining; Inspect Wheel Cylinder; Inspect Brake Strut; Inspect Springs - Suzuki Baleno Manual

INSPECT BRAKE SHOE & LINING
Where lining is worn out beyond service limit, replace shoe.
Brake lining thickness (lining + shoe rim)
Standard : 6.1 mm (0.24 in.)
Service limit : 2.8 mm (0.11 in.)
If one of brake linings is worn to service limit, all linings must be re-
placed at the same time.
NOTE:
Never polish lining with sandpaper. If lining is polished with
sandpaper, hard particles of sandpaper will be deposited in
lining and may damage drum. When it is required to correct
lining, replace it with a new one.

INSPECT WHEEL CYLINDER

Inspect wheel cylinder disassembled parts for wear, cracks, corro-
sion or damage.
NOTE:
Clean wheel cylinder components with brake fluid.

INSPECT BRAKE STRUT

Inspect ratchet of strut for wear or damage.

INSPECT SPRINGS

Inspect for damage or weakening.
Inspect each part with arrow for rust. If found defective, replace.
BRAKES 5-53