Suzuki Baleno Manual page 453

5B-38 ANTILOCK BRAKE SYSTEM (ABS)
1. Clamp screw
2. Sensor bolt
SENSOR INSPECTION
D Check sensor (pole piece) for damage or bent.
D Check sensor for resistance.
Resistance between terminals: 1.2 – 1.6 kW at 20_C (68_F)
Resistance between terminal and sensor body: 1MW or more
If any faulty is found, replace.
SENSOR ROTOR INSPECTION
D Check rotor serration (teeth) for being missing, damaged or de-
formed.
D Turn wheel and check if rotor rotation is free from eccentricity
and looseness.
D Check that no foreign material is attached.
If any faulty is found, repair or replace.
INSTALLATION
1) Check that no foreign material is attached to sensor and rotor.
2) Install it by reversing removal procedure.
Tightening Torque
.
(a): 23 N m (2.3 kg-m, 17.0 lb-ft)
CAUTION:
Do not pull wire harness or twist more than necessary
when installing rear wheel speed sensor.
3) Check that there is no clearance between sensor and knuckle.