Suzuki Baleno Manual page 802

7B1-118 AUTOMATIC TRANSMISSION
1. One-way clutch retainer
2. Thrust needle roller bearing
1. Thrust bearing race
2. Thrust needle roller bearing
3. Rear planetary ring gear flange
REASSEMBLY
1) Set one-way clutch to one-way clutch outer race and rear plane-
tary ring gear.
NOTE:
Check to make sure that thinner section "A" of one-way
clutch faces toward front side.
2) Install the following parts, previously mentioned parts, one-way
clutch retainer and thrust needle roller bearing.
3) Install snap ring.
3. Snap ring
4) Install rear planetary ring gear flange with snap ring.
5) Coat thrust bearing race and thrust needle roller bearing with
A/T fluid.
6) Install them.
4. Snap ring