Suzuki Baleno Manual page 640

7B-70 AUTOMATIC TRANSMISSION (3 A/T)
1. Rear planetary ring gear
2. Ring gear bearing
3. Bearing race
1. 1st-reverse brake plates and discs
1. Rear cover
A: Places to tap for removal
26) Remove rear planetary ring gear, ring gear bearing and wash-
ers.
27) Check 1st-reverse brake clearance.
Measure clearance between snap ring and flange with feeler
gauge. If out of specification, replace 1st-reverse brake discs
or plates.
1st-reverse brake clearance
0.58 – 1.92 mm (0.023 – 0.075 in.)
28) Remove 2 snap rings by using a flat tip screwdriver.
1. Snap ring
29) Remove 1st-reverse brake flange, discs, plates and damper
plate.
30) Remove differential gear assembly.
1. Flange
31) Remove rear cover.
i) Remove 10 bolts and 2 nuts.
ii) Remove rear cover by tapping A with plastic hammer as
shown.