Suzuki Baleno Manual page 1114

9J-14 AIR BAG SYSTEM
Half connectIon
"C", "D", "G" and "H" connector
"B" connector
Short state
(Improperly fitted or
disconnected)
"B" : Passenger air bag connector
"C" : Contact coil connector
"D" : Driver air bag connector
"F" : Ignition connector
"G" : Passenger pretensioner connector (if equipped)
"H" : Driver pretensioner connector (if equipped)
Terminal retainer (Terminal position assurance: TPA):
The function of the TPA is to keep the terminal securely seated in
the connector body. The TPA is not to be removed from the connec-
tor body.
Shorting bar:
Function of the shorting bar is to short circuit the "HI" and "LO" ter-
minals of the initiator circuit on its module side when the connector
is disconnected. This prevents potential difference from occurring
between both terminals to avoid malfunction.
Connector lock lever:
Short cancelled state
(Properly fitted) Functions of the connector lock lever are: to connect connectors
securely, to cancel shorts and to lock connectors against discon-
nection.
1. Connector lock lever
2. Terminal retainer
3. Shorting bar
Complete Connection
1. SDM
2. "AIR BAG" warning lamp driver circuit
3. Connection detection pin
4. "AIR BAG" warning lamp
5. From ignition switch
6. SDM connector