Suzuki Baleno Manual page 461

1) When gear is shifted to 5th speed, 5th & reverse gear shift cam
1. Gear shift &
select shaft
turns clockwise with gear shift & select shaft and it is pushed up
2. 5th & REV gear shift
by cam guide return spring to the position where interlock guide
cam
3. Cam guide return
bolt prevents the cam from being shifted to reverse straight.
spring (Expanded)
4. Gear shift guide
case plate
5. REV select spring
(Compressed)
6. Gear shift & select
lever (In 5th position)
7. 5th to REV interlock
guide bolt
2) Shifting from 5th to neutral is available and further shift to re-
verse is interrupted.
1. Shift & select shaft
2. Shift cam
However, when shift & select shaft is moved to neutral of 3rd –
3. Return spring
4th position, shift limit cam mechanism is canceled as shown in
(Expanded)
4. Case plate
figure.
5. REV select spring
(Expanded)
6. Shift & select lever
(N of 3rd – 4th
position)
7. Guide bolt
3) Selected position in neutral of 5th – REV is shown in figure.
While shift & select shaft moves up to allow shift & select lever
1. Shift & select shaft
to shift in 5th or reverse position, shift cam stays because of in-
2. Shift cam
3. Return spring
terference of guide bolt.
(Compressed)
4. REV select spring
(Compressed)
5. Shift & select lever
(N of 5th – REV
position)
6. Guide bolt
4) Now the mechanism is ready to be shifted to reverse without in-
terference of shift cam.
1. Shift & select shaft
2. Shift cam
3. Return spring
(Compressed)
4. REV select spring
(Compressed)
5. Shift & select lever
(In REV position)
6. Guide bolt
MANUAL TRANSMISSION (G13 AND G16 ENGINE MODELS) 7A-5