Suzuki Baleno Manual page 485

1. Reverse gear shift arm
2. Reverse gear shift arm spring (Blue)
3. Steel ball
4. Spring pin
5. 5th & REV gear shift shaft
6. 5th & REV gear shift yoke
7. 5th & REV gear shift guide shaft
A: Face pin slit toward front
MANUAL TRANSMISSION (G13 AND G16 ENGINE MODELS) 7A-29
5th & REV Gear Shifter
1) Disassemble component parts by using special tool and ham-
mer.
Special Tool
(A): 09922-85811 (4.5 mm)
2) Replace or correct parts as required and assemble shafts mak-
ing sure that component parts are in proper order as shown left.
NOTE:
D Distinguish reverse gear shift arm spring (Blue) from low
speed locating spring (Purple).
D Install 2 steel balls in reverse gear shift arm without fail.
D Drive in spring pin for reverse shift arm facing slit A to-
ward front.