Suzuki Baleno Manual page 171

3C-10 STEERING WHEEL AND COLUMN (NOT EQUIPPED WITH AIR BAG)
1. Interlock cable
2. Screw
(If equipped)
1. Capsules
2. Absorbing plate
11) Remove steering column mounting nuts (4 pcs).
12) If equipped with shift (key) interlock cable, remove shift (key)
interlock cable screw and then disconnect its cable from igni-
tion switch with ignition switch turned at "ACC" position.
After disconnecting, turn ignition switch to "LOCK" position.
13) Remove steering column from vehicle.
WARNING:
Never rest a steering column assembly on the steer-
ing wheel with the air bag (inflator) module face
down and column vertical. Otherwise, personal inju-
ry may result.
INSPECTION
NOTE:
Vehicles involved in accidents resulting in body damage,
where steering column has been impacted, may have a dam-
aged or misaligned steering column.
CHECKING PROCEDURE
1) Check that two capsules are attached to steering column brack-
et securely. If found loose, replace steering column assembly.
Check absorbing plate for crack. If found defective, replace.