Suzuki Baleno Manual page 954

Front Door
1. Front door lock actuator
2. Front door lock actuator coupler
3. Key cylinder switch coupler
Rear Door
4. Rear door lock actuator
Back Door
5. Rear lock actuator coupler
6. Back door lock actuator
7. Back door lock actuator coupler
Power Door Lock Actuator
1) Disconnect power door lock actuator coupler.
2) Connect (+) cord and (–) cord of 12V battery to coupler terminal
(1) and (2).
3) Actuator is proved to be operating properly if (–) cord connec-
tion to terminal (1) results in "Lock" and its connection to termi-
nal (2) results in "Unlock".
4) Hatch-back model only.
Use an ohmmeter to check terminal between (A) and (B).
When key cylinder switch is on "LOCK" position, there should
be no continuity between them. When key cylinder switch is on
"UNLOCK" position, there should be continuity between them.
Key Cylinder Switch
Inspection switch continuity between terminals.
(3)
LOCK
OFF
UNLOCK
BODY ELECTRICAL SYSTEM 8-57
(4) (5)