Suzuki Baleno Manual page 791

1. Transmission rear cover
2. Overdrive/coast clutch assembly
1. Snap ring
1. Snap ring
1. Snap ring
2. Press
3) Measure coast clutch piston stroke while applying and releas-
ing compressed air (400 – 800 kPa, 4 – 8 kg-cm
through oil hole (1) by using special tools.
Special Tool
(A): 09900-20606
(B): 09900-20701
Specified piston stroke: 2.68 – 3.02 mm (0.106 – 0.119 in.)
If piston stroke exceeds specified value, disassemble and in-
spect inner parts.
DISASSEMBLY
1) Remove flanges, discs and plate of overdrive clutch by remov-
ing snap ring in the following order.
<G16 engine model>
(1) Flange " (2) Disc " (3) Plate " (4) Disc " (5) Flange
<J18 engine model>
(1) Flange " (2) Disc " (3) Plate " (4) Disc "(5) Plate
" (6) Disc " (7) Flange
NOTE:
Measure thickness of removed flange (1) and record for ref-
erence of piston stroke confirmation.
2) Remove flanges, discs and plate of coast clutch by removing
snap ring in the following order.
(1) Flange " (2) Disc " (3) Plate " (4) Disc " (5) Flange
NOTE:
Measure thickness of removed flange (1) and record for ref-
erence of piston stroke confirmation.
3) Using special tool and hydraulic press, compress overdrive
clutch return spring and remove snap ring.
Special Tool
(A): 09926-98310
CAUTION:
Be careful when applying pressure, for overpressure
will cause plate section of overdrive clutch return
spring to deform.
4) Remove overdrive clutch return spring.
AUTOMATIC TRANSMISSION 7B1-107
2
, 57 – 113 psi)