Suzuki Baleno Manual page 566

7A2-44 MANUAL TRANSMISSION
1. VSS
2. O-ring
3. Driven gear
1. O-ring 2. Side bearing retainer
1. Side bearing retainer
5) Check O-ring and VSS surface for their flawlessness, apply oil
to O-ring and driven gear and then install VSS to transmission.
Tightening Torque
(a): 5.5 N·m (0.55 kg-m, 4.0 lb-ft)
6) Check side bearing retainer O-ring for flawlessness, apply oil to
O-ring and then install to transmission.
NOTE:
Install side bearing retainer with its "TOP" mark facing up-
ward.
7) Tighten side bearing retainer bolts to specified torque.
Tightening Torque
(a): 19 N·m (1.9 kg-m, 14.0 lb-ft)