Abs Warning Lamp Relay; Ebd Warning Lamp Relay - Suzuki Baleno Manual

Lock
Lock

ABS WARNING LAMP RELAY

INSPECTION
1) Disconnect negative cable at battery.
2) Remove ABS warning lamp relay from relay box.
3) Check resistance between each two terminals.
Between "1" and "3": 78 – 96 W at 20_C (68_F)
Between "2" and "5": Continuity
Between "4" and "5": No continuity
4) Check that there is continuity between terminals "4" and "5"
when battery is connected to terminals "1" and "3".
If check result is not as specified in Step 3) and 4), replace.

EBD WARNING LAMP RELAY

INSPECTION
1) Disconnect negative cable at battery.
2) Remove EBD warning lamp relay from relay box.
3) Check resistance between each two terminals.
Between "2" and "4": 70 – 90W at 205C, 685F
Between "3" and "5": Continuity
Between "1" and "3": No continuity
4) Check that there is continuity between terminals "1" and "3"
when battery is connected to terminals "2" and "4".
If check result is not as specified in Step 3) and 4), replace.
ANTILOCK BRAKE SYSTEM (ABS) 5B-39