9-10 BODY SERVICE
1. Door window regulator attaching screws
Install door window regulator handle so that it has a 455 angle
when glass is fully closed, as illustrated left.
DOOR WINDOW REGULATOR
REMOVAL
1) Remove door glass. (See previous section.)
2) Remove door window regulator attaching screws (six pcs.).
Then, take out regulator through hole (A).
INSTALLATION
Reverse removal procedure for installation, and then noting the fol-
lowing instructions.
Apply multi-purpose grease to sliding parts.
Adjust door window regulator according to following procedure.
a) Loosen seven screws as shown.
b) Raise door glass fully with regulator handle.
c) Tighten five screws (1).
d) Lower door glass.
e) Tighten two screws (2).