Suzuki Baleno Manual page 227

3E-4 REAR SUSPENSION (2WD VEHICLE)
4) Remove strut bracket bolts and nuts.
And then take brake hose off strut bracket using care not to de-
form brake pipe.
5) Remove strut support nuts.
Hold strut by hand so that it will not fall off.
6) Remove strut assembly.
1. Nut
INSTALLATION
1) Install strut by reversing REMOVAL Steps 1) – 6). Insert bracket
bolts in such a direction as shown in figure.
2) Torque all fasteners to specification.
Tightening Torque
(a): 28 N·m (2.8 kg-m, 20.5 lb-ft)
(b): 90 N·m (9.0 kg-m, 65.0 lb-ft)
NOTE:
Do not twist brake hose when installing it.
Install E ring as far as it fits to bracket as shown.