Suzuki Baleno Manual page 793

REASSEMBLY
1) Apply A/T fluid to new O-rings.
2) Install new O-rings to pistons.
3) Set coast clutch piston to overdrive clutch piston by pushing
with fingers.
4) Press overdrive clutch and coast clutch piston to overdrive
clutch drum.
NOTE:
Make sure that O-rings are not twisted or deviated from
position during insertion of piston.
5) Using special tool and hydraulic press, compress overdrive
clutch return spring and install snap ring.
Special Tool
(A): 09926-98310
NOTE:
D When installing return spring, be careful so that return
spring will not fall or tilt.
D Do not align opening in snap ring with lug of overdrive
clutch return spring at its retainer section.
CAUTION:
Be careful when applying pressure, for overpressure
will cause plate section of spring to deform.
1. Snap ring
2. Press
6) Select and measure correct thickness of coast clutch flange
(flange (5) in Step 7)).
A il bl Available clutch flange size
(thickness) (thickness)
AUTOMATIC TRANSMISSION 7B1-109
l t h fl i
3.6 mm (0.142 in.)
3.8 mm (0.150 in.)
4.0 mm (0.157 in.)