Brake Warning Light - Suzuki Baleno Manual

BRAKE WARNING LIGHT

DESCRIPTION OF CIRCUIT
The brake warning light circuit consists of a brake fluid level switch installed in the master cylinder reservoir, and
the light (brake warning light) inside the combination meter. Also, this circuit is additionally provided with the park-
ing brake switch which warns that the parking brake is applied.
OPERATION OF WARNING LIGHT
1) Warning light comes on when engine is stopped while ignition
switch is turned on and parking brake is applied.
2) For bulb check, check that warning light comes on briefly during
engine start regardless of brake fluid level position and parking
brake operation.
3) After starting engine, release parking brake.
If light goes off, brake fluid level is adequate.
INSPECTION
BRAKE FLUID LEVEL SWITCH
Use an ohmmeter to check switch for continuity.
If found defective, replace switch.
OFF position (float up)
ON position (float down)
BODY ELECTRICAL SYSTEM 8-11
1. Battery
2. Main fuse
3. Ignition switch
4. Junction box
5. Combination meter
6. Brake fluid level switch
7. Parking brake switch
8. Joint connector
9. EBD warning lamp relay (if equipped)
10. ABS control module (if equipped)
No continuity
Continuity