1. Combination switch assembly
1. Combination switch assembly
1. Junction/fuse block
1. Steering column lower cover
2. Key cylinder
STEERING WHEEL AND COLUMN (NOT EQUIPPED WITH AIR BAG) 3C-7
10) Remove combination switch from steering column.
INSPECTION
Check combination switch wire harness for any signs of scorching,
melting or other damage. If it is damaged, replace.
INSTALLATION
1) Install combination switch to steering column.
2) Connect three connectors for combination switch wire har-
ness to junction/fuse block.
3) Connect white connector (for auto cruise, optional).
4) Tighten clamp and band for combination switch wire harness.
5) Install lower cover to key cylinder.
6) Tighten steering column lower cover screws, and then install
upper cover to lower cover.