Suzuki Baleno Manual page 1062

9-62 BODY SERVICE
1. Two-side bondable tape
INSTALLATION
1) Attach two-side bondable tape at roof lining.
Dimension
"a": about 75 mm (3.0 in.)
"b": Sedan model
Hatch-back model about 750 mm (30.0 in.)
2) Fasten dome light and luggage light (Wagon model only) har-
ness lead wire on roof lining (without Hatch-back model).
3) With clips installation holes in roof lining positioned properly.
4) Fix front and rear end of roof lining with clips and attach roof lin-
ing to roof securely.
5) Install the following parts:
Sunvisor assembly
Rear view mirror
Dome light
Assist grip
Door weatherstrips
Front and rear pillar trims, center pillar inner upper trim
Sliding roof switch (if equipped)
about 800 mm (31.5 in.)