Suzuki Baleno Manual page 983

8G-18 IMMOBILIZER CONTROL SYSTEM (IF EQUIPPED)
TABLE C IMMOBILIZER INDICATOR LAMP CHECK
(IMMOBILIZER INDICATOR LAMP REMAINS ON AFTER ENGINE STARTS)
G13/G16 Engine
J18 Engine
STEP
1 1) With ignition switch OFF, disconnect couplers
from ECM / PCM.
Does immobilizer indicator lamp turn ON at ignition
switch ON?
For G13/G16 engine
ACTION
For J18 engine
YES
"Br/W" wire shorted to
ground circuit.
1. Main fuse
2. Main relay
3. ECM/PCM
4. Immobilizer indicator lamp
(Vehicle equipped with
immobilizer indicator lamp)
NO
Substitute a known-good
ECM/PCM and recheck.