Front Disc Brake; Remove And Install Pad - Suzuki Baleno Manual

Sy413, sy416, sy418
Hide thumbs Also See for Baleno:
Table of Contents

Advertisement

1. Caliper
2. Caliper pin bolt
3. Disc
1. Caliper pin bolts

FRONT DISC BRAKE

REMOVE AND INSTALL PAD

(SHOE &LINING)
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove caliper pin bolts.
3) Remove caliper from caliper carrier.
1. Caliper
2. Wire hook
3. Pad
NOTE:
Hang removed caliper with a wire hook or the like so as to
prevent brake hose from bending and twisting excessively
or being pulled.
Don't operate brake pedal with pads removed.
4) Remove pads.
INSTALLATION
NOTE:
See NOTE at the beginning of this section.
1) Install pad shims (plates) and pads.
1. Shims (plates)
2. Pads
3. Caliper carrier
2) Install caliper and torque caliper pin bolts to specification.
NOTE:
Make sure that boots are fit into groove securely.
Tightening Torque
(a): 22 N
3) Torque front wheel nuts to specification.
Tightening Torque
(b): 85 N
4) Upon completion of installation, perform brake test.
.
m (2.2 kg-m, 16.0 lb-ft)
.
m (8.5 kg-m, 61.5 lb-ft)
BRAKES 5-37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents