Suzuki Baleno Manual page 905

8-8 BODY ELECTRICAL SYSTEM
1. Battery
2. Fuel meter
3. Test light (12V, 3.4W)
F: Full
E: Empty
1. Fuel level (main) gauge
2. Fuel level sub gauge
INSPECTION
FUEL LEVEL METER
1) Remove rear seat.
2) Disconnect "P/BI" lead wire going to gauge unit.
3) Use a bulb (12V 3.4W) in position to ground lead wire as illus-
trated.
4) Turn ignition switch ON.
Make sure that bulb is lighted with meter pointer fluctuating sev-
eral seconds thereafter. If meter is faulty, replace.
GAUGE UNIT
Use an ohmmeter to confirm that resistance of level gauge unit
changes with change of float position.
2WD model
Position
E
F
1/2
4WD model
Position Position
E
F
1/2
FUEL PUMP, CONTROLLER AND FLOAT SWITCH
Refer to Section 6E1 "FUEL DELIVERY SYSTEM" in this manual.
Resistance (W)
112 – 128
1 – 5
28.5 – 36.5
Resistance (W)
Main
59 – 61 43.5 – 50.5
0.5 – 2.5 0.5 – 2
46.7 – 48.7 27.5 – 33.5
Sub