Suzuki Baleno Manual page 641

1. Reduction driven gear nut
2. Output shaft
1. Output shaft
2. Transmission case
32) Remove reduction driven gear nut.
i) Undo caulking.
ii) Shift manual shift lever to P range so that output shaft is
locked.
iii) Loosen nut.
CAUTION:
Calmly apply torque to loosen nut so as not to
damage reduction gear or parking lock pawl.
33) Pull out reduction driven gear.
34) Drive countershaft out with a plastic hammer.
CAUTION:
To avoid unnecessary damage of speed sensor due
to contact with countershaft gear, it should be re-
moved previously.
35) Remove output shaft by pushing outer race of internal output
shaft bearing with special tools from inside of transmission
case.
CAUTION:
D Do not hit output shaft or shaft end will be dam-
aged.
D Hold special tools by hand while hitting them and
avoid their bounce.
Special Tool
(C): 09925-18011
(D): 09927-08210
AUTOMATIC TRANSMISSION (3 A/T) 7B-71