Suzuki Baleno Manual page 775

Sy413, sy416, sy418
Hide thumbs Also See for Baleno:
Table of Contents

Advertisement

1. Oil reserve plate
2. Oil strainer
1. Manual detent spring
1. Transmission side cover
10) Remove 6 bolts of oil pump body, then remove oil pump body
by hand.
NOTE:
Use care not to cause damage to shaft bushing surface.
If oil pump body can't be removed by hand, remove it by
using gear puller as shown in figure.
1. Oil pump body
11) Remove oil reserve plate by removing 2 bolts.
12) Remove oil strainer.
13) Remove manual detent spring by removing 2 bolts.
14) Remove transmission side cover by removing bolts.
NOTE:
Never reuse removed two bolts (1).
AUTOMATIC TRANSMISSION 7B1-91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents