Suzuki Baleno Manual page 406

1. Booster piston rod
2. Master cylinder piston
3) If measurement is out of specified value, adjust depth by turning
adjusting screw of piston rod.
Special Tool
(C): 09952-16020
Reference
When adjusted as above, if negative pressure is applied to booster
with engine at idle, piston to piston rod clearance "a" should be-
come the specified range below.
Piston-to-piston rod clearance "a": 0 mm (0 in.)
[Other than 1.8L engine RH model]
For Vehicle Not Equipped with ABS
1) Set special tool (A) on master cylinder and push pin until con-
tacts piston.
Special Tool
(A): 09950-96010
1. Master cylinder
2. Piston
3. Pin head
2) Turn special tool upside down and place it on booster. Adjust
1. Booster body
2. Piston rod
booster piston rod length until rod end contacts pin head.
Clearance "b" (Between special tool and piston rod):
0 mm (0 in.)
Special Tool
(A): 09950-96010
3) Adjust clearance by turning adjusting screw of piston rod.
Special Tool
(B): 09952-16010
BRAKES 5-81