Suzuki Baleno Manual page 632

7B-62 AUTOMATIC TRANSMISSION (3 A/T)
1. Drive plate
2. Screwdriver
1. Starting motor
2. Starting motor
mount bolts
DISMOUNTING
1) Take down engine with transmission. (Refer to Section 6A1.)
2) Remove torque converter housing lower plate.
3) Remove drive plate bolts.
To lock drive plate, engage a minus screwdriver with the drive
plate gear.
4) Remove starter motor.
5) Remove transmission stiffener.
1. Stiffener
6) Remove bolts and nuts fastening engine and transmission, and
remove transmission from engine. (Refer to Section 6A1.)
NOTE:
When removing transmission from engine, move it in paral-
lel with crankshaft and use care so as not to apply exces-
sive force to drive plate and torque converter.
WARNING:
Be sure to keep transmission with torque converter
horizontal or facing up throughout the work. Should
it be tilted with torque converter down, converter may
fall off and cause personal injury