Suzuki Baleno Manual page 880

7F-2 REAR DIFFERENTIAL
The differential assembly uses a hypoid bevel pinion and gear.
The differential assembly is decisive in that the drive power is concentrated there. Therefore, use of genuine parts
and specified torque is compulsory. Further, because of sliding tooth meshing with high pressure between bevel
pinion and gear, it is mandatory to lubricate them by hypoid gear oil.
GENERAL DESCRIPTION
1. Drive bevel pinion nut
2. Flange
3. Input oil seal
4. Front case
5. Drive bevel pinion washer
6. Front bearing
7. Spacer
8. Differential carrier
9. Side bearing
10. Side bearing O-ring
11. Side bearing oil seal
12. Retainer
13. Retainer stopper
14. Rear bearing
15. Bevel pinion gear set
16. Breather cover
17. Differential case
18. Oil level plug
19. Breather plug
20. Rear case
21. Differential side washer
22. Differential gear
23. Differential pinion shaft
24. Differential pinion shaft pin
25. Differential pinion
26. Differential pinion
washer