Changing Fluid - Suzuki Baleno Manual

7B-46 AUTOMATIC TRANSMISSION (3 A/T)
1. Oil pan
2. Drain plug
ON-VEHICLE SERVICE
MAINTENANCE SERVICE

CHANGING FLUID

1) Raise vehicle.
2) With transmission cool, remove drain plug and drain fluid.
3) Install drain plug gasket and drain plug to oil pan, and tighten
drain plug to specification.
Tightening Torque
(a): 21 N·m (2.1 kg–m, 15.5 Ib-ft)
4) Remove oil level gauge from oil filler tube, and add new fluid
from oil filler tube. Use DEXRON
alent automatic transmIssion fluid.
NOTE:
D About 0.8 liters (1.7/1.4 US/Imp.pt) of fluid would be nec-
essary to refill oil pan.
D Draining or refilling volume of fluid may change depend-
ing on draining time or temperature etc.
5) Check fluid level with transmission at room temperature and at
normal operating temperature as previously outlined.
(Refer to ''FLUID LEVEL'' in this section.)
A/T fluid specification
An equivalent of DEXRON
Pan and valve body
removal (left for 2 hours or
more)
Overhaul (assembled
with a new torque
converter)
) )
-IIE, DEXRON
)
-IIE, DEXRON
Fluid capacity
3.5 liters
(7.4/6.2 US/Imp. pt)
4.9 liters
(10.4/8.6 US/Imp. pt)
-III or equiv-
)
-III