Suzuki Baleno Manual page 539

1. Reverse gear shift lever
2. Input shaft oil seal
3. Countershaft R bearing cup
1. Input R bearing
1. Input R bearing
2. Plate 3. Bolt
SUB ASSEMBLY SERVICE
RIGHT CASE
1) For installation procedure, refer to Step 1) of same item in Sec-
tion 7A.
2) Install input shaft oil seal facing its spring side upward. Use spe-
cial tool and hammer for installation and apply grease to oil seal
lip.
"B": SUZUKI SUPER GREASE A, 99000-25010
Special Tool
(A): 09913-84510
3) Install countershaft R bearing cup by using special tools and
hammer.
Special Tool
(B): 09913-75821
(C): 09924-84510-004
4) Install input R bearing by using special tool and hammer.
Special Tool
(A): 09913-76010
5) Install input R bearing stopper plate and bolt applied with thread
lock cement.
"A": Thread lock 1322, 99000-32110
Tightening Torque
(a): 10 N·m (1.0 kg-m, 7.5 lb-ft)
LEFT CASE
1) For installation procedure, refer to Steps 1) and 3) of same item
in Section 7A.
MANUAL TRANSMISSION 7A2-17