Suzuki Baleno Manual page 839

1. Torque converter
2. Flange nut
3. Transmission housing
4. Cup
81) Install torque converter to input shaft.
a) Install torque converter, using care not to damage oil seal
of oil pump.
b) After installing torque converter, check to make sure that
distance "a" is within specification.
Distance "a": More than 21.4 mm (0.843 in.)
c) Check torque converter for smooth rotation.
CAUTION:
Before installing converter, make sure that its
pump hub portion is free from nicks, burrs or dam-
age which may cause oil seal to leak.
Be very careful not to drop converter on oil pump
gear. Damage in gear, should it occur, may cause
a critical trouble.
AUTOMATIC TRANSMISSION 7B1-155