Suzuki Baleno Manual page 211

3D-12 FRONT SUSPENSION
REMOVE AND INSTALL SUSPENSION ARM /
BUSHING
REMOVAL
1) Hoist vehicle and remove wheels.
2) Remove stabilizer link nut, washer and cushion.
3) Remove ball stud bolt.
4) Remove suspension arm front bushing bolt.
5) Remove suspension arm rear bracket bolt and nut.
6) Remove rear bracket and suspension arm.
7) Remove rear bushing by using hydraulic press.
1. Press
2. Rod
3. Rear bushing
8) Remove flange of front bushing and then push out front bushing
by using hydraulic press.
1. Front bushing
2. Suspension arm
3. Press