Suzuki Baleno Manual page 1128

9J-28 AIR BAG SYSTEM
TABLE C – "AIR BAG" WARNING LAMP FLASHES (Page 1 of 2)
: Air bag harness
1. From main fuse
2. Ignition switch
3. "IG" fuse in J/B
CAUTION:
D When measurements are requested in this table use specified digital multi meter with correct ter-
minal adapter from special tool (Connector test adapter kit).
D When a check for proper connection is requested refer to "INTERMITTENT AND POOR CONNEC-
TION" in Section 0A.
D When an open in air bag wire harness, damaged wire harness, connector or terminal is found, re-
place wire harness, connectors and terminals as an assembly.
TABLE TEST DESCRIPTION
STEP 1: Check "AIR BAG" monitor coupler.
STEP 2: Check diagnosis switch circuit for air bag system.
4. "AIR BAG" fuse in J/B
5. "AIR BAG" warning lamp in combination meter
6. "AIR BAG" monitor coupler
7. Connection detection pin
8. SDM
8-1. "AIR BAG" warning lamp driver circuit