Tire Placard; Service Operations; Metric Lug Nuts And Wheel Studs; Wheel Removal - Suzuki Baleno Manual

5-TIRE ROTATION
[LH] [RH]
4-TIRE ROTATION

TIRE PLACARD

The tire placard is located on the left door (right door for right-hand
side steering vehicle) lock pillar and should be referred to for tire
information.
The placard lists the maximum load, tire size and cold tire pressure
where applicable.
TIRE ROTATION
To equalize wear, rotate tires according to left figure periodically.
Set tire pressure.
NOTE:
Due to their design, radial tires tend to wear faster in the
shoulder area, particularly in front positions. This makes reg-
ular rotation especially necessary.
ON-VEHICLE SERVICE

SERVICE OPERATIONS

METRIC LUG NUTS AND WHEEL STUDS

All models use metric lug nuts and wheel studs (size: M12 x 1.25).

WHEEL REMOVAL

1) Loosen wheel nuts by approximately 1805 (half a rotation).
2) Hoist vehicle.
3) Remove wheel.
CAUTION:
Never use heat to loosen tight wheel because applica-
tion of heat to wheel can shorten life of wheel and
damage wheel bearings.
WHEELS AND TIRES 3F-5