Disassemble And Assemble Rear Strut Assembly - Suzuki Baleno Manual

DISASSEMBLE AND ASSEMBLE REAR
STRUT ASSEMBLY
DISASSEMBLY
1) With special tool (A) placed to spring as shown, turn special tool
bolts alternately until spring tension is released .Whether it is re-
leased or not can be known by whether strut turns lightly while
strut spring is held stationary.
Special Tool
(A): 09940-71430
2) While keeping spring compressed with special tool as shown
above, remove strut nut.
Special Tool
(A): 09945-26010 (17 mm socket)
(B): 09900-00411 (Socket)
(C): 09900-00414 (6 mm)
3) Disassemble strut assembly.
REAR SUSPENSION (2WD VEHICLE) 3E-5
1. Strut upper cap
2. Strut upper nut
3. Strut support
4. Spring upper seat
5. Spring (rubber) seat
6. Strut dust cover
7. Bump stopper
8. Coil spring
9. Spring lower seat
10. Strut