Suzuki Baleno Manual page 887

1. Differential case
2. Pinion
1. Bolt 2. Drive bevel gear
1. Side bearing
2) Check pinion gear for smooth rotation.
3) Align pinion shaft hole position with differential case and drive
in differential pinion shaft pin till they are flush with end surface
of case.
Special Tool
(A): 09922-85811
4) Apply thread lock cement to thread of bevel gear bolts.
5) Put bevel gear on differential case and fasten them with 8 bolts
by tightening them to specified torque.
CAUTION:
Use of any other bolts than that specified is prohib-
ited.
"A": Thread Lock Cement 99000-32020
Tightening Torque
(a): 73 N·m (7.3 kg-m, 52.0 lb-ft)
DIFFERENTIAL SIDE BEARING
1) Press-fit side bearing with special tool.
Special Tool
(A): 09951-16060
(B): 09924-74510
2) Hold bearing press-fitted in Step 1) with holder and press-fit
side bearing on the other side.
NOTE:
Be sure to use bearing holder for the purpose of protecting
lower bearing.
Special Tool
(A): 09951-16060
(B): 09924-74510
(C): 09923-78210
REAR DIFFERENTIAL 7F-9