Suzuki Baleno Manual page 863

CLUTCH FLUID PIPE AND HOSE
For left-hand steering vehicle
1. Pipe
2. Hose
3. Spanner
4. Flare nut wrench
REMOVAL
NOTE:
Do not allow fluid to get on painted surface.
1) Remove dust and dirt from each joint of hose and pipe to be dis-
connected and clean around reservoir cap.
2) Take out fluid with syringe or such.
3) Disconnect fluid pipe from hose.
NOTE:
To disconnect pipe from hose, separate them by using flare
nut wrench and spanner so as not to kink them.
INSPECTION
Check pipe and hose for dent, kink, crack, dirt and dust. Replace
if check result is not satisfactory.
1. Pipe (For right-hand
steering vehicle)
2. Hose
CLUTCH (HYDRAULIC TYPE) 7C1-7
For right-hand steering vehicle
1. Master cylinder
2. Pipe
3. Hose
4. Operating cylinder
5. Clamp