Suzuki Baleno Manual page 798

7B1-114 AUTOMATIC TRANSMISSION
3) Remove No.1 (F1) one-way clutch by removing snap ring.
1. No.1 (F1)
one-way
clutch
2. Snap ring
4) Remove thrust washer.
Reference value for washer
Outside diameter : Approximately 85.3 mm (3.36 in.)
Inside diameter
Thickness
1. Thrust washer
5) Remove thrust bearing race.
Reference value for race
Outside diameter : Approximately 80.2 mm (3.16 in.)
Inside diameter
Thickness
1. Thrust bearing race
6) Remove thrust needle roller bearing.
Reference value for bearing
Outside diameter : Approximately 83.2 mm (3.28 in.)
Inside diameter
Thickness
7) Remove O-ring.
NOTE:
1. Thrust needle
roller bearing
Never reuse O-ring after removal.
2. O-ring
8) Remove front planetary ring gear flange by removing snap ring.
1. Front planetary
ring gear flange
2. Snap ring
: Approximately 70.0 mm (2.76 in.)
: Approximately 2.6 mm (0.10 in.)
: Approximately 68.3 mm (2.69 in.)
: Approximately 0.8 mm (0.03 in.)
: Approximately 64.9 mm (2.56 in.)
: Approximately 2.7 mm (0.11 in.)